Society of African Journal Editors

South African Journal of Chemical Engineering

South African Journal of Chemical Engineering

Enhancing adsorption capacity of nano-adsorbents via surface modification: A review

Synthesizing and characterizing the mixed Al,Cu-pillared and copper doped Al-pillared bentonite for electrocatalytic reduction of CO2

Microalgae as a biocathode and feedstock in anode chamber for a self-sustainable microbial fuel cell technology: A review

Development of a techno-economic framework for natural gas dehydration via absorption using tri-ethylene glycol: A comparative study between DRIZO and other dehydration processes

Modeling the attainable regions for catalytic oxidation of renewable biomass to specialty chemicals: Waste biomass to carboxylic acids

Simultaneous adsorptive study of toxic metal ions in quaternary system from aqueous solution using low cost black cumin seeds (Nigella sativa) adsorbents

Synergistic combination effect of clove essential oil extract with basil and atlas cedar oil on the corrosion inhibition of low carbon steel

Synthesis and characterization of alumina supported coconut chaff catalyst for biodiesel production from waste frying oil

Acknowledgement of reviewers

Prediction of maximum oil-yield from almond seed in a chemical industry: A novel type-2 fuzzy logic approach

Anhydrous bio-ethanol produced from Elaeis Guineensis palm wine for use as a biodiesel feedstock

Toxicology evaluation and antidermatophytic activity of silver nanoparticles synthesized using leaf extract of Passiflora caerulea

Characterization of alkaline modified anthill and investigation of its catalytic behaviour in transesterification of Chrysophyllum albidium seed oil

Synthesis and optimization of reaction variables in the preparation of pine-magnetite composite for removal of methylene blue dye

Purification of residual glycerol recovered from biodiesel production

Corrigendum to "An attainable region approach for the recovery of iron and zinc from electric arc furnace dust [South Afr. J. Chem. Eng.] 27 (2019) 35–42"

Influence of inorganic acid modification on Cr(VI) adsorption performance and the physicochemical properties of activated carbon

Organic removal rates and biogas production of an upflow anaerobic sludge blanket reactor treating sugarcane molasses

Production of biodiesel from Soybean Oil and Methanol, catalyzed by calcium oxide in a recycle reactor

Electro-oxidation and chemical oxidation treatment of sugar industry wastewater with ferrous material: An investigation of physicochemical characteristic of sludge

Using KDF material to improve the performance of multi-layers filters in the reduction of chemical and biological pollutants in surface water treatment

Response surface methodology approach to optimization of process parameter for coagulation process of surface water using Moringa oleifera seed

DNA hybridisation sensors for product authentication and tracing: State of the art and challenges

Leaching kinetics on the removal of phosphorus from waste phosphogypsum by application of shrinking core model

Activity coefficients at infinite dilution of various organic solutes in the deep eutectic solvent (tetramethylammonium chloride + 1,6 hexanediol in the 1:1 molar ratio)

An attainable region approach for the recovery of iron and zinc from electric arc furnace dust

Structural, electrical and electrochemical studies of copper substituted layered LiNi1/3Co1/3Mn1/3O2 cathode materials

Evaluation of thermodynamic behavior of Bisphenol A in water with deep eutectic solvents

Methanol and sodium chloride inhibitors impact on carbon dioxide hydrate formation

Development of immobilized microcrystalline cellulose as an effective adsorbent for methylene blue dye removal

A Facile plant mediated synthesis of silver nanoparticles using an aqueous leaf extract of Ficus hispida Linn. f. for catalytic, antioxidant and antibacterial applications

Corrosion inhibition properties of the combined admixture of essential oil extracts on mild steel in the presence of SO42− anions

Comparative study of various carbon sources on rhamnolipid production

Evaluation on La2O3 garlanded ceria heterostructured binary metal oxide nanoplates for UV/ visible light induced removal of organic dye from urban wastewater

Chemically stable proton conducting doped BaCeO3 by citrate-EDTA complexing sol-gel process for solid oxide fuel cell

Value addition of coal fines and sawdust to briquettes using molasses as a binder

Anaerobic treatment of opaque beer wastewater with enhanced biogas recovery through Acti-zyme bio augmentation

Vapour–liquid equilibrium prediction for synthesis gas conversion using artificial neural networks

Review of hybrid evolutionary algorithms for optimizing a reservoir

Torrefaction of waste biomass for application in energy production in South Africa

Xanthium strumarium leaves extracts as a friendly corrosion inhibitor of low carbon steel in hydrochloric acid: Kinetics and mathematical studies

RETRACTED: Improved Nitrogen-Doped Carbon Materials for High Performing Lithium Air Batteries

Structural and electrochemical characterizations of nanostructured olivine LiNi1-xCoxPO4 (x=0 and 0.5) cathode materials for lithium-ion batteries

Electrochemical behavior study of salicylic acid following azo dye formation with 2,4-dinitrophenylhydrazine: Analytical evaluation

Synthesis of titanium (IV) oxide composite membrane for hydrogen production through alkaline water electrolysis

Energy changes during use of high-power ultrasound on food grade surfaces

Biological treatment of distillery wastewater by application of the vermifiltration technology

Effect of ball and feed particle size distribution on the milling efficiency of a ball mill: An attainable region approach

Product design for a functional non-alcoholic drink

Comparison study between Ni/TiO2 and Ni/flame synthesized TiO2 catalysts for hydrogen production using thermocatalytic decomposition of methane

Page 1 of 3, showing 50 records out of 113 total, starting on record 1, ending on 50